Optical wavelength converter QFC-MM2SFP-mux
|
QTECH CWDM system presents carriers with a way to selectively increase the utilization of existing fiber lines to accommodate today’s LAN and SAN applications in the MAN. It provides a protocol-transparent platform with ultra large bandwidth at a low cost, satisfying enterprise customer’s requirements perfectly and standing carriers a good chance for high margin revenues.
QFC-MM2SFP is a versatile optical-conversion module QFC-M allows to change the usual wavelength of any device with data rate up to 2,G to CWDM specific wavelength.
QFC-MM2SFP is carrier-class CWDM optical wavelength converter with industry leading advanced feathers such as line-in/line-out loop back, fault propagation, downward compatibility of speed and 3R function (Re-shaping, reamplification and re-timing). It provides SFP connectors for both customer interface and line interface, enabling a flexible installation and cost-effective upgrading.
This module can be installed in different types of QTECH’s chassis 3U or 1U high and be Manageable when inserted in chassis with network management card through QTECH management system.
Re-shaping, re-amplification and re-timing for a lower jitter and longer distance transmission.
Line-in and line-out loop back provides a flexible fault propagation means.
Fault-Pass-Through is a troubleshooting feature that allows the optical wavelength converter to monitor the optical link by shutdown one optical port if there is loss of signal on the other optical link.
Downward compatibility of speed assures lower speed services can be transmitted over higher speed optical interface.
Hot-swappable SFP optical connectors for both customer site and CWDM line site for a flexible installation and upgrading Service/protocol transparent transmission.
