About Products Contacts Support RUS +7 (495) 797-3311
QTECH - Quality Technology
Ethernet switches
TDM access equipment
CCTV transmission equipment on the optics
CWDM - coarse wavelength division multiplexing
VoIP equipment
Power systems and control
Passive telecom equipment
User equipment

 
 You are here: Mane page / Products / / Ethernet access switches / QSW-2900 Layer 2+ Enhanced Security Intelligent Switch
 

QSW-2900 Layer 2+ Enhanced Security Intelligent Switch

Key Features
Technical Specifications
 

Product Specification:

Item QSW-2900-24 F QSW-2900-24 T QSW-2900 T4
Fixed interfaces Non 24 10/100M TX 24 10/100M TX
Extensive interfaces 3 8ЧFE extended slot
2 FE/GE extended slot
2 FE/GE extended slot Non
Extensive module 8FE-TX
8FE-SM-LH25
8FE-SM-S1310/1550
8FE-SM-S1550/1310
1FE-SM-SC
1FE-SM-S1310/1550-LH20
1FE-SM-S1550/1310-LH20
1FE-TX
1GE-LX-SC-G
1GE-TX
1GE-SFP
Non
Extensive module 1FE-SM-SC
1FE-SM-S1310/1550-LH20
1FE-SM-S1550/1310-LH20
1FE-TX
1GE-LX-SC-G
1GE-TX
1GE-SFP
Size 440mm * 360mm * 44mm 440mm * 160mm * 44mm 440mm * 160mm * 44mm
Weight <4Kg <2,5Kg <2,5Kg
Input pressure AC 176∼265V 47∼63Hz
DC -36 -72V
Power consumption <60w <25w <25w
Working environment Temperature 15∼55º humidity 5∼95% (non-coagulation)

Service feature:

Features QSW-2900-24 F, QSW-2900-24 T, QSW-2900 T4
Switching capacity 19.2 Gbps
Transmitting mode Storage transmit
Support 9K Jumbo frame
Packet transmitting rate 6.55Mpps
Packet cache 32M
MAC address table 9K
Support blackhole MAC address
VLAN Supports VLAN based on interface
Supports 4K 802.1Q VLAN and VLAN Trunk
Supports QinQ VLAN (QinQ port based, QinQ vlan based, QinQ Selective)
Supports PVLAN to realize interface isolatin and economize public VLAN resource
Supports GVRP (GARP VLAN Registration Protocol), and provides VLAN’s auto-register)
Supports Port Based VLAN and 802.1Q VLAN exist at the same time
L2 Multicast Support IGMP v1/v2/v3 snooping, IGMP Policy - Fast leave, supports 1K Multicast that can be controlled
Support Multicast VLAN
Supports cross-VLAN multicast copy
Qos/ACL Supports standard and extensive ACL, and at most 300 - 1K flow regulations can be activate at the same time
Supports CAR, and the granularity of FE/GE interface flow speed-limit is 64Kbit/s or 1Mbit/s
Every port supports 4 priority queue scheduler and PQ and WRR queue scheduler matching
Supports 802.1P, DSCP/TOS priority and Remark.
Spanning-tree STP/RSTP/MSTP/ERRP
Interface convergence Supports static and LACP dynamic convergence
Mirror Interface mirror and flow mirror
Bandwidth control The granularity is 64 Kbit/s
Security Supports IEEE 802.1x and AAA/Radius authentication
Supports SSHv2
Supports ACL flow filtrate mechanism
Supports broadcast message control
Supports data log and consummuated Syslog
Supports all kinds of binding of IP address,VLAN ID, MAC address and inteface
Supports managing security policy and configured IP address and Telnetlogging in and password mechanism
Support Selective QinQ for “VpU/VpS” and VPN services, PPPoE Plus and CLIPS AAA schemes
Supports all kinds of effective DOS attack (such as ARP attack, Synflood attack, Smurf attack, ICMP attack), ARP monitor, worm and worm blaster attack
Reliability Support Real Time fast convergence <200 millisecond by protocol ERRP(EAPS)
Support Storms suspect defend from any kind of storms- broadcast, multicast, unicast and unknown unicast
Supports LACP loading balance
Management and maintenance Supports command-line interface (CLI) and Console interface configuration
Supports SNMP (Simple Network Management Protocol) V1/V2/V3, Telnet remote configuration and WEB network management
Supports RMON (Remote Monitoring) 1, 2, 3, 9 group MIB
Supports system log and alarm classification
Supports debug information output and PING and Traceroute
Supports LLDP auto-detecting protocol



 
Рейтинг@Mail.ru